- High-quality phono preamplifier for the unique sound of vinyl records
- The Duo is suitable for all turntables as it is equipped with MM and MC input stages
- The Duo also features a 6.35mm headphone input and volume control
- Modern switching power supply - fast response, high stability, and low noise
- Excellent signal-to-noise ratio through the use of SMD components and optimized board layout
- High-quality aluminum front and all-metal housing in stylish graphite grey
- Subsonic filter eliminates ‘rumble’ at very low frequencies caused by imperfections in the vinyl
- Balance control for fine correction of cartridge imbalances
- Environmentally friendly standby power consumption < 1W and auto-power-down after 20 minutes without signal
Vinyl as it should sound
Enjoy the unique warm sound of vinyl records and all the sonic depths of fine analog details with this MM and MC phono preamplifier and integrated headphone amplifier - the Duo Phono Preamplifier.
Whether you've dusted off your old record collection or want to experience the vinyl renaissance, now you can have a unique musical experience as soon as the needle touches your favorite album. Thanks to a state-of-the-art switching power supply and a new, surface-mounted board layout that reduces unwanted noise, the Duo Phono Preamplifier preserves the unique warmth of vinyl sound.
Due to the low-level signals generated by a turntable, not all hi-fi amplifiers can be connected directly to a turntable. The phono preamplifier amplifies this signal so that a power amplifier can work with it. However, this can easily lead to additional noise. For this reason, the Duo was designed to deliver a warm and detailed, record-typical sound without distorting the signal from your moving magnet system. The switching power supply increases performance by switching outside the audible frequency, which results in significantly less hum; a new board layout reduces noise through surface-mounted components.
Vinyl. Just for you.
Thanks to the integrated headphone output on the Duo, you can enjoy the warm sound of vinyl all to yourself. Cambridge Audio has integrated a 6.35mm headphone jack directly into the phono preamplifier. This allows you to experience your records even when you don't have the opportunity to play them loudly. And thanks to the integrated headphone output, there's no need to turn on the amplifier to power your headphones.
For the environment
With less than half a watt of standby power consumption and automatic shutdown after 20 minutes of non-use, the Duo Phono Preamplifier is green at heart. Thanks to its adapted voltage, the Solo can also be used all over the world.
Technical data
| MAX POWER CONSUMPTION CARTRIDGE SUPPORT GAIN @ 1KHZ NOMINAL OUTPUT SENSITIVITY FOR NOMINAL OUTPUT EQUIVALENT INPUT NOISE (A-WEIGHTED) RIAA CURVE ACCURACY SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW) THD+N 1KHZ (20-20KHZ BW) INPUT IMPEDANCE INPUT CAPACITANCE OVERLOAD MARGIN CROSSTALK @ 10KHZ DIMENSIONS (H X W X D) WEIGHT |
10 W Moving Magnet | Moving Coil MM: 39 dB | MC: 60 dB 300 mV MM: 3,35 mV | MC: 305 uV MM: ~0,09 uV | MC: ~0,08 uV +/- 0,3 dB 30 Hz - 50 Hz MM: > 90 dB | MC: > 70 dB MM: < 0,0025 % | MC: < 0,20 % MM: 47k Ohm | MC: 100 Ohm 100 pF > 30 dB MM: > 85 dB | MC: 75 dB 48 x 215 x 159 mm (1.9 x 8.5 x 6.2") 0.95kg (2.1lbs) |