The OPTICON series has been the heart of the DALI product range for over five years. It has opened up access to the DALI sound world for countless music lovers and audiophiles. However, it was time to enrich the OPTICON series with new ideas and technologies and to further develop it aesthetically. Welcome to the DALI OPTICON MK2.
- Fresh and elegant aesthetics with new finish options (Satin Black and Tobacco Oak), complemented by speaker grilles in furniture textile quality.
- New woofers and mid-range drivers with SMC technology and wood fiber cones adopted from the DALI EPICON speakers.
- New, DALI-developed and manufactured tweeter with a larger diameter based on the DALI CALLISTO tweeter.
- Hybrid tweeters (soft dome and ribbon) in the OPTICON 6, 8, LCR and VOKAL MK2 models.
- New die-cast aluminum tweeter front plates.
- DALI Dual Flare bass reflex ports reduce turbulence and noise.
- Revised crossovers with improved, low-loss components.
- Optional bi-wiring connection possible for OPTICON 6 MK2 and OPTICON 8 MK2.
- Acoustic tuning for the revised MK2 to optimize the perceived playback quality.
OPTICON 8 MK2
The large floor-standing loudspeaker OPTICON 8 MK2 is the unmistakable "powerhouse" of the new OPTICON MK2 series and its only three-way system. It is equipped with two woofers with SMC magnets and 8-inch wood fiber cones, as well as a 6½-inch mid-range driver, again with an SMC magnet system and a wood fiber cone. Bi-wiring is optionally possible with the OPTICON 8 MK2, allowing its woofers and mid-range drivers, as well as the high-frequency module, to be connected independently. In the driver array of the OPTICON 8 MK2, the mid-range drivers and hybrid tweeters are located between the two widely spaced woofers. This positions the mid-range and tweeters at approximately the typical ear height for seated music enjoyment. In addition, the greater distance between the woofers results in a more balanced bass reproduction. The driver arrangement of the OPTICON 8 MK2 facilitates positioning in the listening room. Above the mid-range driver of the OPTICON 8 MK2 is a DALI Hybrid Tweeter.
It includes the new 29 mm diameter soft dome tweeter adopted from the CALLISTO series and the ribbon element measuring 17 × 45 mm. Within the OPTICON 8 MK2, non-parallel partitions separate the individual drivers from each other. They reduce internal resonances and ensure significantly higher cabinet stiffness. Each woofer area has its own Dual-Flare bass reflex tube. Thanks to its size and three-way design, the OPTICON 8 MK2 offers a reproduction quality and performance that is unsurpassed by any other OPTICON model. It combines a powerful bass foundation, ample reserves even for high playback levels and dynamic precision with the extraordinary detail and clarity that results from the use of a dedicated mid-range driver. The hybrid tweeter, in turn, delights with a detailed and three-dimensional, yet also soft and
pleasing sound.
The OPTICON 8 MK2 comes with cast aluminum feet. These are supplemented either with black chrome-plated floor spikes or (if placement on delicate floors is planned) vibration-damping pads. Tools for assembling the cast feet and spikes are included.
Technical data
| Model | Dali OPTICON 8 MK2 |
| Frequency Range [±3] dB [Hz] | 38 to 30,000 |
| Sensitivity (2.83V/1m) [dB] | 88.5 |
| Nominal Impedance [Ohms] | 4 |
| Maximum SPL [dB] | 112 |
| Recommended Amplifier Power [Watts] | 40 to 300 |
| Crossover Frequency [Hz] | 380 / 2,200 / 14,000 |
| Crossover Type | 3+½-way |
| High Frequency Driver | 1 x 29 mm Soft Dome 1 x 17 x 45 mm Ribbon |
| Low/Mid Frequency Driver | 2 x 8" / 1 x 6½" |
| Enclosure Type | Bass Reflex (sealed mid-range box) |
| Bass Reflex Tuning Frequency [Hz] | 29.5 |
| Input Terminals | Bi-wire / Bi-amp |
| Recommended Placement | Floor |
| Recommended Distance from Rear Panel to Wall [cm] | 30 to 150 |
| Dimensions (H × W × D) [mm] | 1141 x 241x 450 |
| Weight [kg] | 34.0 |
| Accessories | Spike set, rubber feet, manual |