- For bottom-mounting to the headshell
- "Nude" diamond with Fine Line stylus
- Cartridge for very high sonic demands
- Upgrade to 2M Black possible
Always looks good
The Ortofon 2M Bronze features a slim-profiled Fine Line stylus. This guarantees low distortion with balanced reproduction across the entire frequency range. The Ortofon 2M Bronze performs better in all respects than its two smaller siblings, the Ortofon 2M Red and the Ortofon 2M Blue. An upgrade to the higher-quality Ortofon 2M Black is possible by mounting the Ortofon Stylus 2M Black cantilever.
The Ortofon 2M Bronze Verso is mounted to the headshell from below using interchangeable threaded pins (diameter 2mm and 2.5mm). This allows it to fit many Thorens headshells, for example, which only permit bottom mounting of the cartridge.
Technical data
|
Model |
Ortofon 2M Bronze Verso |
|
Pickup Type: |
MM (moving magnet) |
|
Output Voltage: |
5.5mV* |
|
Amplifier connector: |
Phono MM |
|
Channel deviation at 1 kHz: |
1dB |
|
Crosstalk attenuation at 1kHz: |
26dB |
|
Crosstalk attenuation at 15kHz: |
15dB |
|
Frequency range: |
20-29,000Hz |
|
Frequency Response: |
20-20,000Hz +2/-1dB |
|
Sampling capability at 315Hz: |
80m** |
|
Needle Give: |
22µm/mN |
|
recomm. Tonearm Type: |
light and medium weight |
|
Scan Diamond: |
Fine Line, nude |
|
Fillet: |
r/R 8/40µm |
|
Tracking force range: |
14-17mN (1.4-1.7g) |
|
recomm. Tracking Force: |
15mN (1.5g) |
|
Scan Angle: |
20 degrees |
|
DC Resistance: |
1.2k ohms |
|
Inductance: |
630mH |
|
recomm. Terminator: |
47k ohms |
|
recomm. Completion Capacity: |
150-300pF |
|
Case material: |
Lexan DMX |
|
Height (not PnP MkII): |
18mm |
|
Weight: |
7.2g |
|
Replacement needle tray: |
Stylus 2M Bronze |
|
Special feature: |
Winding made of silver-plated OFC copper wire |
|
*at 1000Hz, 5cm/sec. **at recommended tracking force |
