- For medium-mass tonearms
- Very high tracking ability
- Fineline stylus
- Coils made of pure silver wire
The sound of the Ortofon MC Cadenza Red has an immediate relaxing effect on the listener. Less groove noise, a homogeneous frequency distribution, and effortless dynamics turn Hi-Fi into music therapy. The good spatial imaging in width and depth enhances the impression of being there.
The diamond is "naked" mounted – such a "naked" diamond has less moving mass compared to a glued diamond. Due to the lower inertia, the stylus can follow the groove modulation more easily. The slim-profiled Fine Line stylus extracts even more information from the groove compared to a rounder cut.
Technical data
|
Model |
Ortofon MC Cadenza Red |
|
Pickup Type: |
MC (low output moving coil) |
|
Output Voltage: |
0.45mV* |
|
Amplifier connector: |
Phono MC |
|
Channel deviation at 1 kHz: |
<1.5dB |
|
Crosstalk attenuation at 1kHz: |
>23dB |
|
Crosstalk attenuation at 15kHz: |
>15dB |
|
Frequency range: |
20-50,000Hz |
|
Frequency Response: |
20-20,000Hz +3dB/-1dB |
|
Sampling capability at 315Hz: |
80m** |
|
Needle Give: |
12µm/mN |
|
recomm. Tonearm Type: |
moderate |
|
Scan Diamond: |
Fine Line, nude |
|
Fillet: |
r/R 8/40µm |
|
Tracking force range: |
22-27mN (2.2-2.7g) |
|
recomm. Tracking Force: |
25mN (2.5g) |
|
Scan Angle: |
20 degrees |
|
DC Resistance: |
5 ohms |
|
recomm. Terminator: |
50-500 ohms |
|
Case material: |
Stainless steel/aluminium |
|
Height: |
18mm |
|
Weight: |
10.7g |
|
Special feature: |
Wrap made of pure silver wire |
|
*at 1000Hz, 5cm/sec. **at recommended tracking force |
|