SVS SB-5000 REvolution

Technical data

Finish: Piano Gloss Black, Premium Black Ash Frequency response: 17-280 Hz ± 3 dB Power: 2000 Watt RMS continuous power (5000+ Watt peak) Principle: Closed cabinet Driver: Ultra 15″ / Dual 3″ voice coil WEEE-Reg. No.: DE27382810

Driver: 15"

Power: 2,000 watts RMS (over 5. 000 watts peak), Class D

Frequency response: 17 Hz to 280 Hz +/-3 dB

Dimensions: 465 mm H x 453 mm W x 495 mm D

Frequency response / Acoustic data:

• 17 Hz to 280 Hz +/-3 dB
• Expect 2-3Hz lower extension in small to medium sized rooms.
• The roll-off angle has been specially optimised to maximise the available room reinforcement.
• 2-metre plane, away from reflective structures.

Subwoofer specifications:

• Piano Gloss Black and Black Ash options

• Front-firing 15-inch high-excursion driver

• The OLED display on the back of the amplifier and the control surface enable quick and direct control of the most important functions and offer a practical "display flip" function.

• The protective, resonance-free, extra-thick ABS grille frame with fabric cover shields the speaker to prevent damage and ensure a long service life.

• Robust MDF cabinet construction with internal stiffening for resonance-free performance at the highest volume.

• Screwed-in iso-elastomeric fibres reduce noise artefacts and improve stability

• Dimensions (with grille): 465 mm H x 453 mm W x 495 mm D

• Dimensions (without grille): 465 mm H x 453 mm W x 468 mm D

• Dimensions incl. packaging. Packaging: 588mm H X 598mm W X 712mm D

• Weight (unpacked): 46.3kg

• Weight (packed): 54.8kg

Driver specifications:

• Völly new proprietary 15-inch long excursion driver with high precision tuned overhung drive configuration.
• 46.32mm Xmax, 77.44mm Xmech precisely aligned excursion
• 3" diameter voice coil with 6-layer, bifilar, flat, edge-wound aluminium wire windings for high currents; high power
• The dual voice coil design combines the power of two mono amplifier outputs into a single voice coil for maximum acoustic performance.
• High-temperature fibreglass composite for the voice coil former
• The two-piece, high-quality, oversized Y30 ferrite magnet motor generates smooth, on-demand drive power for subtle and outstanding bass response.
• Copper shorting sleeve around the T-yoke reduces gap inductance and reduces distortion
• Two 24-core silver-plated high-temperature copper alloy and Nomex composite wires woven through the spider provide a flawless electrical connection between the condenser cores and the voice coils.
• Two linear Nomex composite suspension spiders with extreme excursion.
• The proprietary injection-moulded NBR rubber surround with extreme excursion ensures flawless piston movement, providing precise control and accuracy without distortion even at the highest volumes.
• The high-quality, glass fibre laminated dust cap and the composite cone substructure with an exceptional stiffness-to-mass ratio ensure a light, ribbed and neutral dispersion surface that moves enormous volumes of air with razor-sharp precision.
• High-density 15" powder-coated cast aluminium basket, FEA-optimised for maximum rigidity, tensile strength and energy transfer.
• Nickel-plated high-voltage spring terminals ensure secure connections.

Specifications of the amplifier:

• Massively powerful 2,000 watt continuous Class D design with over 5,000 watts peak power.
• High resolution 295Mhz Analog Devices Audio DSP with double precision 56bit filtering, with more than 5x the processing power of our previous subwoofers, the most advanced subwoofer processor on the market for perfect audio reproduction.
• The DSP monitors every function of the amplifier and ensures that a precisely regulated, clean voltage is supplied to and from the switching power supply and that maximum current is delivered to the driver voice coils.
• DSP continuously runs complex power management algorithms and multi-point thermal, voltage and current monitoring systems to optimise the AC voltage supply to the power supply for continuous peak performance with maximum performance and efficiency.
• Advanced digital audio processing and DACs (digital-to-analogue converters) with a signal-to-noise ratio of 120 dB ensure greater headroom, less noise and pristine fidelity.
• The discrete Class D dual mono amplifiers generate effortless and endless power from eight massive 60A 200V MOSFETs, resulting in lower EMI and highest e?ciency, while effortlessly powering each voice coil and producing SPLs and low frequencies with pristine clarity far beyond the reference listening level. They power each voice coil effortlessly, producing SPLs and low frequencies with pristine clarity far beyond the reference listening level.
• The new switch mode power supply (SMPS) features a two-stage active power factor correction (PFC) for the entire range from 100 V to 240 V, which optimises the mains independently of the mains voltage and the frequency; This regulates the mains to a stable 390 V DC regardless of the mains voltage and quality, thus ensuring a constant 160 V rail voltage for the dual mono amplifiers.
• Power Factor Correction (PFC) adapts the AC voltage to the AC current over time, resulting in lower heat generation, higher efficiency, higher peak power and the ability to maintain rated power over a wide range of AC voltages.
• The integrated AC line conditioner filters and stabilises the input voltage, corrects waveform distortion and eliminates electromagnetic and radio interference to optimise signal quality and audio performance.
• The new convective cooling plate design draws cool air through the ventilation holes on the underside of the amplifier plate and flows over the amplifier components and internal heat sinks, eliminating the need for external heat sinks; The new convective heat sink design draws cool outside air through the vents on the bottom of the amplifier plate and flows over the amplifier components and internal heat sinks, eliminating the need for external heat sinks.
• Customised EQ and DSP limiter settings specifically for the 5000 Series allow the subwoofer to take control of a room and put it under pressure with precise, heart-rending, acoustically tuned bass.
• Unbalanced RCA input impedance of 10 kOhm (compatible with consumer and professional audio inputs up to 4 Vrms)
• Balanced XLR input impedance of 14 kOhm (compatible with consumer and professional audio inputs up to 4 Vrms); up to 4 Vrms / +14 dBu)
• OLED and user interface with simple control of the most important functions
• The SVS SoundPath Wireless Audio Adapter (sold separately) is powered via USB, eliminating the need to run a cable from the source component to the subwoofer.
• Auto/on and trigger options üvia app for maximum installation convenience (3.5 mm trigger input 3-12 V AC/DC)
• 3.5 mm IR input for easy integration into control systems
• Grü ny 0.5 watt power consumption in standby mode
• RoHS compliant, lead-free construction, worldwide safety certifications.

SVS App Features:

• The industry-leading SVS Subwoofer Control smartphone app is compatible with Apple iOS, Google Android and Amazon Fire and enables convenient and intuitive management of all subwoofer controls.
• The Analog Devices DSP supports a comprehensive menu of features, including volume, fully adjustable low-pass filter, phase, polarity, six PEQs, room gain compensation, tuning modes, power management settings and more.
• With three convenient presets for quick and easy global system customisation to suit the listener's preferences.
• Automatic Subwoofer Room Matching (coming soon) uses your mobile device's built-in microphone or an accessory microphone (coming soon) to measure the acoustic performance of your subwoofer in your room and automatically calculate precise equalisation filters to optimise the combined performance of the subwoofer and room at your listening position.
• Unique bi-directional feedback displays real-time adjustments on both the app and the subwoofer surface.
• The easy-to-understand tutorial provides clear instructions for all functions.

Included accessories:

• Protective, resonance-free, extra-thick ABS grille frame with fabric covering
• Iso-elastomer feet
• Extra strong, high-current 1.8m mains cable
• Quick start guide